Regulatory Compliance

UL 1310, The UL Standard for Safety of Class 2 Power Supplies, AC Adapters and Battery Chargers testing
Our technical evaluation will include the following tests based on UL1310:

• Voltage stress testing
• Load stress testing
• Leakage current testing
• Dielectric withstand testing
• Humidity testing
• Connector analysis and testing
• Maximum input voltage testing
• Output current and power testing
• Normal temperature
• Restricted air flow during temperature testing
• User abuse tests
• Component failure test

UL 1642, The UL Standard for Safety of Lithium-ion Batteries testing
Our technical evaluation will include the following tests based on UL1642:

• Electrical stress tests
  • Short circuit test
  • Heating test
  • Abnormal charging test
  • Forced discharge test 
• Environmental stress tests
  • Heating test
  • Temperature cycling test
  • Low pressure altitude simulation test
• Mechanical stress tests
  • Crush test
  • Impact test
  • Humidity test
  • Shock test
  • Vibration test
  • Drop test
• User replaceable Li-Ion batteries
  • Fire exposure test
  • Test for flaming particles
  • Projectile test
  • Explosion test

UL 2054, The UL Standard for Safety of Commercial and Household Battery Packs testing
Our technical evaluation will include the following tests based on UL2054:

• Electrical tests
  • Short circuit test
  • Abnormal charging test
  • Abusive overcharge test
  • Forced discharge test
  • Limited power source test 
• Mechanical tests
  • Crush test
  • Impact test
  • Shock test
  • Vibration test
• Battery enclosure tests
  • General
  • 250 lb crush test
  • Mold stress relief tests
  • Drop impact test
• Fire exposure tests
  • Test for flaming particles
  • Projectile test
• Environmental tests
  • Heating test
  • Temperature cycling test

United Nations Recommendations on the Transport of Dangerous Goods for Li and Li-Ion battery packs
Our technical evaluation will include the following tests based on the following United Nations test requirements:

• Altitude simulation stress testing
• Vibration, shock, and short circuit testing
• Vibration, shock, and charge testing
• Internal short testing
• Vibration, shock, and low capacity cell testing
• Forced discharge testing

IEEE1625 Standard for Rechargeable Batteries for Mobile Computers
Our technical evaluation for all cells, battery pack and chargers follow the following guidelines:

• Battery pack safety design
• Electrical over-stress conditions
• Mechanical stress conditions
• Connector interface stress conditions
• Assembly precautions
• Configuration of cells in the battery pack
• Normal operating conditions
• Rating of components
• Other relevant battery testing standards
• Field failure analysis experience

ANSI C18.2M, Part 1-2003 American National Standard for portable rechargeable cells and batteries
Our technical evaluation will include the following tests based on ANSI C18.2M:

• Electrical tests
  • Charge and discharge capacity characterization
  • Temperature effects on charge and discharge capacity characterization
  • Effective internal resistance
  • Internal impedance characterization
  • Cycle life testing
  • Extended charging testing
  • Storage testing
  • Charge efficiency
  • Over-discharge performance
• Mechanical tests
  • Shock test
  • Vibration test
  • Drop test
  • Terminal endurance test
  • Thermal shock test

top